Linux version 2.6.18-diskstation1 (tobias@blackbox) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #3 Thu Oct 18 10:17:41 CEST 2007
Synology Diskstation
Port by Philippe Kehl (phkehl at gmx fot net)
Based on: Motorola SPS Sandpoint Test Platform
Port by MontaVista Software, Inc. (source@mvista.com)
and Port by Synology Inc. (product@synology.com)
On node 0 totalpages: 16384
  DMA zone: 16384 pages, LIFO batch:3
Built 1 zonelists.  Total pages: 16384
Kernel command line: console=ttyS0,115200 root=/dev/mapper/marle-root rw
OpenPIC Version 1.2 (1 CPUs and 11 IRQ sources) at fc040000
PID hash table entries: 512 (order: 9, 2048 bytes)
todc_time.c:todc_calibrate_decr(): Decrementer frequency = 133.333765 MHz
Warning: real time clock seems stuck!
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 60032k available (1240k kernel code, 360k data, 92k init, 0k highmem)
Calibrating delay loop... 177.15 BogoMIPS (lpj=354304)
Mount-cache hash table entries: 512
checking if image is initramfs... it is
Freeing initrd memory: 3191k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
Registering openpic with sysfs...
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xfc004500 (irq = 25) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
TCP bic registered
NET: Registered protocol family 1
Freeing unused kernel memory: 92k init
physmap platform flash device: 01000000 at ff000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash.0: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
Searching for RedBoot partition table in physmap-flash.0 at offset 0xfe0000
8 RedBoot partitions found on MTD device physmap-flash.0
Creating 8 MTD partitions on "physmap-flash.0":
0x00000000-0x00180000 : "zImage"
0x00180000-0x00800000 : "rd.gz"
0x00800000-0x00f00000 : "AllLib.tgz"
0x00f00000-0x00f80000 : "RedBoot"
0x00f80000-0x00fa0000 : "vendor"
0x00fa0000-0x00fc0000 : "synocfg"
0x00fc0000-0x00fe0000 : "RedBoot Config"
0x00fe0000-0x01000000 : "FIS directory"
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
skge 1.6 addr 0xbfff8000 irq 18 chip Yukon-Lite rev 9
skge eth0: addr 00:11:32:00:73:d6
ehci_hcd 0000:00:0e.2: EHCI Host Controller
ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
libata version 2.00 loaded.
ehci_hcd 0000:00:0e.2: irq 17, io mem 0xbfffcf00
ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd 0000:00:0e.0: OHCI Host Controller
ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0e.0: irq 17, io mem 0xbfffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:0e.1: OHCI Host Controller
ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:0e.1: irq 17, io mem 0xbfffd000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sata_sil 0000:00:0d.0: version 2.0
sata_sil 0000:00:0d.0: cache line size not set.  Driver may not function
sata_sil 0000:00:0d.0: Applying R_ERR on DMA activate FIS errata fix
ata1: SATA max UDMA/100 cmd 0xC5024E80 ctl 0xC5024E8A bmdma 0xC5024E00 irq 16
ata2: SATA max UDMA/100 cmd 0xC5024EC0 ctl 0xC5024ECA bmdma 0xC5024E08 irq 16
scsi0 : sata_sil
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 0
ata1.00: configured for UDMA/100
scsi1 : sata_sil
ata2: SATA link down (SStatus 0 SControl 310)
  Vendor: ATA       Model: HDT722525DLA380   Rev: V44O
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1
sd 0:0:0:0: Attached scsi disk sda
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Filesystem "dm-1": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-1
Ending clean XFS mount for filesystem: dm-1
Filesystem "dm-1": Disabling barriers, not supported by the underlying device
loop: loaded (max 8 devices)
Filesystem "dm-2": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-2
Ending clean XFS mount for filesystem: dm-2
Adding 102392k swap on /dev/mapper/marle-swap_1.  Priority:-1 extents:1 across:102392k
skge eth0: enabling interface
NET: Registered protocol family 17
skge eth0: Link is up at 100 Mbps, full duplex, flow control tx and rx