Linux version 2.6.26-diskstation1 (2.6.26) (tobias@marle) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #5 Mon Feb 23 09:00:54 CET 2009
Synology Diskstation
Port by Philippe Kehl (phkehl at gmx fot net)
Based on: Motorola SPS Sandpoint Test Platform
Port by MontaVista Software, Inc. (source@mvista.com)
and Port by Synology Inc. (product@synology.com)
Entering add_active_range(0, 0, 16384) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->    16384
  Normal      16384 ->    16384
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->    16384
On node 0 totalpages: 16384
  DMA zone: 128 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 16256 pages, LIFO batch:3
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: console=ttyS0,115200 root=/dev/mapper/marle-root rw
OpenPIC Version 1.2 (1 CPUs and 11 IRQ sources) at fc040000
PID hash table entries: 256 (order: 8, 1024 bytes)
todc_time.c:todc_calibrate_decr(): Decrementer frequency = 133.333765 MHz
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 58664k available (1500k kernel code, 508k data, 116k init, 0k highmem)
Calibrating delay loop... 177.35 BogoMIPS (lpj=886784)
Mount-cache hash table entries: 512
net_namespace: 324 bytes
NET: Registered protocol family 16
PCI: Probing PCI hardware
Registering openpic with sysfs...
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 4119k freed
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 122
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xfc004500 (irq = 25) is a 16550A
brd: module loaded
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
TCP cubic registered
Freeing unused kernel memory: 116k init
physmap platform flash device: 01000000 at ff000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash.0: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
Searching for RedBoot partition table in physmap-flash.0 at offset 0xfe0000
8 RedBoot partitions found on MTD device physmap-flash.0
Creating 8 MTD partitions on "physmap-flash.0":
0x00000000-0x00180000 : "zImage"
0x00180000-0x00800000 : "rd.gz"
0x00800000-0x00f00000 : "AllLib.tgz"
0x00f00000-0x00f80000 : "RedBoot"
0x00f80000-0x00fa0000 : "vendor"
0x00fa0000-0x00fc0000 : "synocfg"
0x00fc0000-0x00fe0000 : "RedBoot Config"
0x00fe0000-0x01000000 : "FIS directory"
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SCSI subsystem initialized
skge 1.13 addr 0xbfff8000 irq 18 chip Yukon-Lite rev 9
skge eth0: addr 00:11:32:00:73:d6
usbcore: registered new device driver usb
ehci_hcd 0000:00:0e.2: EHCI Host Controller
ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd 0000:00:0e.2: irq 17, io mem 0xbfffcf00
libata version 3.00 loaded.
ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
sata_sil 0000:00:0d.0: version 2.3
sata_sil 0000:00:0d.0: cache line size not set.  Driver may not function
sata_sil 0000:00:0d.0: Applying R_ERR on DMA activate FIS errata fix
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 mmio m512@0xbffffe00 tf 0xbffffe80 irq 16
ata2: SATA max UDMA/100 mmio m512@0xbffffe00 tf 0xbffffec0 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ATA-7: HDT722525DLA380, V44OA9BA, max UDMA/133
ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 310)
scsi 0:0:0:0: Direct-Access     ATA      HDT722525DLA380  V44O PQ: 0 ANSI: 5
ohci_hcd 0000:00:0e.0: OHCI Host Controller
ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0e.0: irq 17, io mem 0xbfffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:0e.1: OHCI Host Controller
ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:0e.1: irq 17, io mem 0xbfffd000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Filesystem "dm-1": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-1
Ending clean XFS mount for filesystem: dm-1
udevd version 125 started
Filesystem "dm-1": Disabling barriers, not supported by the underlying device
loop: module loaded
XFS: bad magic number
XFS: SB validate failed
Adding 102392k swap on /dev/mapper/marle-swap_1.  Priority:-1 extents:1 across:102392k
skge eth0: enabling interface
NET: Registered protocol family 17
skge eth0: Link is up at 100 Mbps, full duplex, flow control both
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
warning: `ntpd' uses 32-bit capabilities (legacy support in use)
Filesystem "dm-3": Disabling barriers, not supported by the underlying device
XFS mounting filesystem dm-3
Ending clean XFS mount for filesystem: dm-3
nfsd: last server has exited
nfsd: unexporting all filesystems
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period