Linux version 2.6.15 (tobias@blackbox) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #4 Thu Mar 22 21:53:59 CET 2007 Motorola SPS Sandpoint Test Platform Port by Synology Inc. (product@synology.com) Built 1 zonelists Kernel command line: console=ttyS0,115200 root=/dev/sda1 rw OpenPIC Version 1.2 (1 CPUs and 11 IRQ sources) at fc040000 PID hash table entries: 512 (order: 9, 8192 bytes) Decrementer frequency = 133.333765 MHz Warning: real time clock seems stuck! Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 61824k available (2140k kernel code, 788k data, 132k init, 0k highmem) Mount-cache hash table entries: 512 NET: Registered protocol family 16 PCI: Probing PCI hardware arch/ppc/platforms/sandpoint.c(200) idsel = 13, pin = 1, irq = 16 arch/ppc/platforms/sandpoint.c(200) idsel = 14, pin = 1, irq = 17 arch/ppc/platforms/sandpoint.c(200) idsel = 14, pin = 2, irq = 17 arch/ppc/platforms/sandpoint.c(200) idsel = 14, pin = 3, irq = 17 arch/ppc/platforms/sandpoint.c(200) idsel = 15, pin = 1, irq = 18 fsl-i2c.1: failed to claim resource 0 unable to register device 0 fsl-dma.0: failed to claim resource 0 unable to register device 1 fsl-dma.1: failed to claim resource 0 unable to register device 2 SCSI subsystem initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xfc004500 (irq = 25) is a 16550A serial8250.1: ttyS1 at MMIO 0xfc004600 (irq = 26) is a 16550A RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 8 devices) drivers/scsi/sata_sil.c (586) Delay 10 seconds to wait for disk ready. sata_sil 0000:00:0d.0: Applying R_ERR on DMA activate FIS errata fix ata1: SATA max UDMA/100 cmd 0xC5000E80 ctl 0xC5000E8A bmdma 0xC5000E00 irq 16 ata2: SATA max UDMA/100 cmd 0xC5000EC0 ctl 0xC5000ECA bmdma 0xC5000E08 irq 16 ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi0 : sata_sil ata2: no device found (phy stat 00000000) scsi1 : sata_sil Vendor: ATA Model: HDT722525DLA380 Rev: V44O Type: Direct-Access ANSI SCSI revision: 05 drivers/scsi/sd.c (1648) Internal disk with bus id: 0 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write through SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 physmap flash device: 1000000 at ff000000 phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 phys_mapped_flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cmdlinepart partition parsing not available Searching for RedBoot partition table in phys_mapped_flash at offset 0xfe0000 8 RedBoot partitions found on MTD device phys_mapped_flash Creating 8 MTD partitions on "phys_mapped_flash": 0x00f00000-0x00f80000 : "RedBoot" 0x00000000-0x00180000 : "zImage" 0x00180000-0x00800000 : "rd.gz" 0x00800000-0x00f00000 : "AllLib.tgz" 0x00f80000-0x00fa0000 : "vendor" Mac0 00:11:32:00:73:d6 vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0. Vender partition MacNum:1 retlen:64 0x00fa0000-0x00fc0000 : "synocfg" 0x00fc0000-0x00fe0000 : "RedBoot Config" 0x00fe0000-0x01000000 : "FIS directory" DS406-0: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 DS406-0: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Searching for RedBoot partition table in DS406-0 at offset 0xfe0000 8 RedBoot partitions found on MTD device DS406-0 DS406 flash bank 0: Using RedBoot partition definition Creating 8 MTD partitions on "DS406-0": 0x00f00000-0x00f80000 : "RedBoot" 0x00000000-0x00180000 : "zImage" 0x00180000-0x00800000 : "rd.gz" 0x00800000-0x00f00000 : "AllLib.tgz" 0x00f80000-0x00fa0000 : "vendor" Mac0 00:11:32:00:73:d6 vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0. Vender partition MacNum:1 retlen:64 0x00fa0000-0x00fc0000 : "synocfg" 0x00fc0000-0x00fe0000 : "RedBoot Config" 0x00fe0000-0x01000000 : "FIS directory" md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 318.000 MB/sec 8regs_prefetch: 250.000 MB/sec 32regs : 283.000 MB/sec 32regs_prefetch: 249.000 MB/sec raid5: using function: 8regs (318.000 MB/sec) md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem). Freeing unused kernel memory: 132k init Mounting proc filesystem... umount: Couldn't umount /initrd: Invalid argument Check new disk... Not new disk. Do nothing. swapon: /dev/hda2: No such device or address /dev/sda1 on / type ext3 (rw,data=ordered) /tmp on /tmp type tmpfs (rw) Hostname marle 192.168.2.3 marle Network interfaces: eth0 lo Mounting sysfs... Mounting usbfs... mount: Mounting /proc/bus/usb on /proc/bus/usb failed: No such file or directory insmod: /lib/modules/2.6.15: No such file or directory insmod: sk98lin.ko: no module by that name found Load synobios.... insmod: /lib/modules/2.6.15: No such file or directory insmod: synobios.ko: no module by that name found mknod: synobios: File exists SIOCSIFADDR: No such device SIOCGIFFLAGS: No such device dhcpcd[752]: synoether.c (149) Failed to ioctl SIOCGIFHWADDR. Interface:eth0 (No such device) dhcpcd[752]: synoether.c (238) Failed to get hardware address. dhcpcd[752]: dhcpStart: ioctl SIOCGIFHWADDR: No such device ifconfig: eth0: error fetching interface information: Device not found lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Add default router 192.168.2.1 ip: RTNETLINK answers: Network is unreachable kernel.panic = 3 Starting syslogd... Pass s00_synocheckfstab ... Pass CheckSynoinfo ... Pass CheckUser Pass CheckSmbConf ... Pass CheckCronTab ... Pass CheckGroup. Pass s62_synocheckapple ... Checking and Mounting filesystem(s) ... synogetfstype read file system magic failed on /dev/hda3:/volume1. errno=1 synokerneltz: set kernel time zone to -60 kernel.core_pattern = /volume1/@%e.core fs.suid_dumpable = 2 vm.min_free_kbytes = 4096 done. Starting scemd... Starting Card Reader Polling Daemon ... synocheckshare: Pass SYNOICheckShare() synocheckshare: Pass SYNOICheckShareExt() cat: /var/run/scheduler.pid: No such file or directory synocheckshare: Pass SYNOICheckServiceLink() synobootup: BEGIN synobootup: END Starting inetd... Starting crond... Starting PostgreSQL... LOG: could not create unrecognized address family 10 socket: Address family not supported by protocol LOG: database system was shut down at 1976-07-06 02:33:40 CET LOG: checkpoint record is at 0/BDED30 LOG: redo record is at 0/BDED30; undo record is at 0/0; shutdown TRUE LOG: next transaction ID: 322; next OID: 17129 LOG: database system is ready Update photo log table where log id = 0 to test db existence UPDATE 0 Update media type table where type id = 0 to test db existence ?column? ---------- (0 rows) MySQL is not enabled. Skip... Volume of service download is not found volume : 0 Download hasn't set its' volume, let user to choose... ?column? ---------- 1 (1 row) Update download queue table and set all pid to -1 UPDATE 0 UPDATE 0 Starting Download Station scheduler daemon ... printer not found no volume found Never Start lpd until volume exist... Starting Synology Indexing Daemon ... Local package initialization:startup daemons . Starting smbd and nmbd. Tue Jul 6 02:30:22 CET 1976